Finding the best concrete cutting in Palmerston North comes down to matching the right saw to the job, whether that is a control joint in a fresh slab, a doorway cut through a block wall, or a 300 mm core for new drainage. Concrete cutting in Palmerston North is handled by specialist crews working from bases in the city, at Awahuri in the wider Manawātū, and further south in the lower North Island, using floor saws, wall saws, ring saws and core drilling rigs to open up only what the work actually requires. City Concrete Cutters and Pro-Cut Concrete Manawatu are two of the operators covering the area.
1City Concrete Cutters
City Concrete Cutters is a dustless concrete cutting, demolition and project management business based in Palmerston North and working across the North Island. The team covers core and dyna drilling, wire sawing, floor and wall sawing, grinding and scarifying, alongside excavation, concrete placing and driveway removals. It suits residential and commercial clients who want the cutting, the breakout and the reinstatement handled by one crew.
Services
- Core and dyna drilling, from 14 mm through to one metre in diameter
- Floor, wall and wire sawing through concrete, masonry and brick
- Concrete grinding, milling, scarifying and scabbling
- Ferro scanning and crack monitoring to locate services and assess concrete integrity
- Driveway removals and reinstatements, with excavation and site preparation
Highlights
- Established in 2017
- Site Wise and Totika accredited
- Runs a Husqvarna DXR remote demolition robot that fits through an 800 mm doorway and works indoors on electric power
- Owns its own diggers and dump trucks, so demolition spoil leaves with the same crew
- Team of six, five of them permanently on site
Location & Contact
Name: City Concrete Cutters
Address: Palmerston North, Manawātū 4414
Phone: 0800 222 729
Website: cityconcretecutters.co.nz
2Pro-Cut Concrete Manawatu
Pro-Cut Concrete Manawatu is a concrete and asphalt cutting specialist with its workshop at Awahuri, servicing the Manawātū, Horowhenua, Rangitīkei and Wairarapa. Jobs range from residential slab control joints and small penetrations through walls and floors up to bridge beams, precast warehouse wall penetrations and wall removal. Grinding, polishing, slurry control and concrete removal are handled alongside the sawing.
Services
- Core hole drilling
- Hand sawing and flush cutting close to walls and floors
- Concrete floor sawing and wall sawing, including a three phase electric floor saw
- Road saw cutting of asphalt
- Anti-slip grooving for cow sheds, car parks and ramps
Highlights
- Workshop based at Awahuri, north west of Palmerston North
- Four concrete cutters, all BCITO trained, with more than 50 years of cutting experience between them
- Members of the New Zealand Concrete Sawing and Drilling Association
- Staff are Site Safe members
- Two soft cut saws for early entry control joint cutting
Location & Contact
Name: Pro-Cut Concrete Manawatu Limited
Address: Awahuri, Manawātū
Phone: 021 579 188
Website: procutconcrete.co.nz
3A Grade Concrete Cutters and Drillers
A Grade Concrete Cutters and Drillers is a Manawātū concrete cutting and drilling operation, with Joseph Kurene as the contact for enquiries. The work covers hand sawing in tight or intricate spaces, floor sawing for larger horizontal cuts, and core drilling for plumbing, electrical and HVAC installations. Residential, commercial and industrial projects are all quoted, and quotes are free.
Services
- Hand sawing for tight spaces and intricate cuts
- Floor sawing for expansion joints, utility trenches and removal of damaged sections
- Core drilling with barrels from 12 mm up to 1000 mm
Highlights
- BCITO qualified, holding the New Zealand Certificate in Concrete Specialist
- Direct contact with Joseph Kurene from quote through to the cut
- Free quotes across the Manawātū region
Location & Contact
Name: A Grade Concrete Cutters and Drillers
Address: Palmerston North
Phone: 027 383 4327
Website: agradeconcretecutters.co.nz
4KCC Limited
KCC Limited is a concrete cutting, core drilling and demolition contractor whose Wellington division covers Palmerston North, the Wairarapa, Paraparaumu and Picton from a base at Naenae in Lower Hutt. Its equipment runs from petrol and high frequency hand saws through to wall saws cutting up to 700 mm and floor saws reaching 630 mm, plus diamond wire sawing for heavily reinforced sections that a blade cannot manage. It is worth a call for larger or awkward structural cuts that can be booked in rather than needed the same day.
Services
- Diamond wire sawing for large or heavily reinforced concrete, cut vertically or horizontally
- Wall sawing up to 700 mm thick for window, door and duct openings
- Floor sawing to a maximum depth of 630 mm for roads, warehouse aprons and stress cuts
- Ring, bar and cut and break hand sawing for staircases, footings and double brick walls
- Concrete core drilling and floor shaving
Highlights
- Operating since 2016, with 54 years of combined industry experience across the team
- Site Wise accredited and a member of the New Zealand Concrete Contractors Association
- Wellington division, which covers Palmerston North, is run by operations manager James Feaunati
Location & Contact
Name: KCC Limited
Address: 2 Horlor Street, Naenae, Lower Hutt 5011
Phone: 022 032 5578
Website: kccltd.co.nz
Concrete Cutting in Palmerston North at a Glance
| Business | Highlight |
|---|---|
| City Concrete Cutters | Established in 2017 |
| Pro-Cut Concrete Manawatu | Workshop based at Awahuri, north west of Palmerston North |
| A Grade Concrete Cutters and Drillers | BCITO qualified, holding the New Zealand Certificate in Concrete Spec... |
| KCC Limited | Operating since 2016, with 54 years of combined industry experience a... |
How to Choose the Right Concrete Cutting in Palmerston North
- Match the saw to the cut: a floor saw for horizontal slab and asphalt work, a wall saw or ring saw for openings, and a wire saw where a section is too thick or too reinforced for a blade
- Ask what depth the crew can reach in a single pass, which ranges from around 150 mm on a petrol hand saw to 700 mm on a track mounted wall saw
- Check how dust and slurry are controlled, since wet cutting, extraction and slurry containment matter on occupied and indoor sites
- Ask whether the concrete is scanned before cutting, so reinforcing, conduits and buried services are located before a blade goes in
- Look at health and safety credentials such as Site Wise or Site Safe, and whether operators hold BCITO concrete qualifications
Frequently Asked Questions About Palmerston North Concrete Cutting
How much does concrete cutting cost?
Cutting is quoted per job rather than at a fixed rate, because the price turns on the depth of the cut, how much reinforcing is in the concrete, site access and how much slurry containment is needed. Manawātū crews will usually quote once they know the thickness and location of the cut, and free quotes are common. Sending photos and rough measurements with your enquiry gets you a realistic figure faster.
Can a concrete cutter get through reinforced concrete?
Yes. Diamond blades cut the concrete and the embedded steel together, so reinforced slabs and walls are routine work. Where a section is very thick or heavily reinforced, a diamond wire saw is used instead, because the wire cuts by abrasion and is not limited by blade diameter.
What is core drilling used for?
Core drilling makes clean round holes through concrete, asphalt or masonry for plumbing, electrical, drainage, ducting and ventilation, and for dowels between concrete pours. Core barrels available locally run from 12 mm up to a metre in diameter, so the hole is sized to the service rather than the other way round.
How is dust managed when concrete is cut indoors?
Most crews cut wet, feeding water to the blade so the dust is carried away as slurry, and use extraction where water is not practical. This matters because the dust from cutting concrete contains respirable crystalline silica, a recognised workplace health risk covered by WorkSafe New Zealand guidance. Ask how slurry will be contained and removed before work starts indoors.
Do I need a building consent to cut an opening in a wall or slab?
Cutting a new doorway or window into a structural wall, or removing part of a load bearing slab, changes the structure and generally needs a building consent. Small service penetrations and control joints usually do not. The rules and the exemptions are set out by Building Performance, and a designer or engineer can confirm what your job needs.
What about cutting a driveway or the footpath at the kerb?
Work on the road reserve, including a new or widened vehicle crossing, needs approval from Palmerston North City Council before the saw comes out. On private property no council approval is needed for the cut itself, although reinstatement may still form part of a wider consented job.
Which parts of the city and district do local crews cover?
Concrete cutters in Palmerston North generally work the whole city and the surrounding district, taking in Awahuri, Bunnythorpe, Ashhurst, Longburn and Feilding, with several also covering Horowhenua, Rangitīkei and the Wairarapa. Because the saws travel to site, a crew based a short drive out of town is no less practical than one in the city. Confirm travel when you book if your site sits well beyond the district.
What is the difference between soft cut and standard saw cutting?
Soft cut saws are built for early entry cutting of control joints, going in soon after the pour so shrinkage cracking is controlled before it starts. A standard floor saw is used once the slab has gained strength, and cuts deeper. Your concreter or the cutting crew will advise which suits the mix and the conditions on the day.
How We Chose the Best Concrete Cutting in Palmerston North
Every business in this guide was found by searching for concrete cutting in Palmerston North, then checked against what the business publishes itself: its own website, or where it has none, its official social or booking page. Names, addresses and phone numbers come from those pages rather than a directory feed, so what you see here is what the business says about itself. We also check that each one is still trading and is actually based in or genuinely serving Palmerston North, rather than a national operator running a local landing page. A business we can’t confirm from its own pages is not listed.